HALOGEN PRE-FOCUS BULBS - TOP PERFORMANCE REPLACEMENT LIGHT BULBS FOR CYCLE LIGHTS, TORCHES, FLASHLIGHTS, LANTERNS, AND EMERGENCY LIGHTS
HALOGEN PRE-FOCUS / PUSH-IN / P13.5s BULBS - FOR BIKE LIGHTS, CYCLE DYNAMO LIGHTS AND TORCHES
- The Ultimate Filament Bulbs
|
|
- Technically Advanced Gas Mixture
|
|
|
- Smaller, Hotter Filament for Whiter Light
|
For 3W dynamo generators powering both head and tail lights, select GH90 for the headlamp. Dynamo tail bulb is GV601 in the Vacuum section. If the dynamo-generator powers the headlight only, select GH103.
For 2.4W generators select GH90 for the headlight only.
Notes:
To identify bulbs suitable for your light, you may be able to use markings on the old one. For more information, click on the “BULB FINDER” button which takes you to the Reflectalite Bulb Finder, and select Bicycle Bulbs or Torch Bulbs. You will also see any possible upgrades. The Halogen Bulb section has additional information on each Halogen Bulb. For convenience you can return here by closing the tab or using the browser back button.
Pre-Focus (push-in "PR") Halogen Bulbs are shown below, in order of increasing Voltage. Details are: Voltage [V], Amps [A] and Watts [W] (electric power), followed by Brightness [Lumens], and the quantity of cells. These bulbs have the P13.5s Pre-focus/Push-in international standard base, 9.2mm diameter, as found in most cycle lights and flashights.
These Halogen Bulbs are not damaged by being touched as they do not contain quartz. However, it is beneficial to remove finger marks and keep the glass clean.
Stocks Note: GH182 has been replaced by GH155.
FOR ALL BULB TYPES CLICK HERE: ALL BULB TYPES PLEASE CHECK THE LED BULB SECTIONS IF YOU CANNOT FIND A FILAMENT BULB.
HALOGEN PRE-FOCUS LIGHT BULBS
CODE |
BASE |
V |
A |
W |
LUMENS Light Output
(average)
|
DEGREES Beam Angle |
Qty. NiCd, NiMH, or Dry Cells |
Qty. Lead Acid Cells |
GH88 |
Push-in
|
2.2V
|
1.9A |
4.2W |
38
|
|
2 |
. |
GH182 |
Push-in |
2.5V |
0.5A |
1.25W |
11 |
|
2 |
|
GH155 |
Push-in
|
2.5V
|
0.8A |
2W |
23
|
|
2 |
|
GH143 |
Push-in
|
4V
|
0.75A |
3W |
33
|
|
3 |
2 |
GH164 |
Push-in
|
5.2V
|
0.85A |
4.4W |
85
|
|
4 |
|
GH90 |
Push-in
|
6V
|
0.4A |
2.4W |
35
|
|
5 |
3 |
GH103 |
Push-in
|
6V
|
0.5A |
3W |
46
|
|
5 |
3 |
GH15 |
Push-in
|
6V
|
1A |
6W |
100
|
|
5 |
3 |
GH24 |
Push-in
|
6V
|
1.7A |
10W |
201
|
|
5 or 6 |
3 |
As the draw here's clearly the bezel, it doesn’t hurt the relaxation from the replica watch looks quite appealing on its own with even creamy patina along with a clean dial and sharp situation.
|